NSD VARILIMIT VS-12PB - All Data Delete (Initialize); Procedure for VS-12 PB Initialization

● 9-31 ●
9-7-2. All Data Delete (Initialize)
This function is used to delete all data settings which have been designated at the VS-12PB. When executed,
the VS-12PB will be restored to its initial status, and all user-designated settings will be deleted.
[1] Designate the INIT mode.
Turn the mode key switch to the INIT position.
[2] Designate Channel No.90.
Press the key, then enter “90”.
[3] Designate data “9”.
Enter “9”, then press the key.
[4] Designate password “12”.
Enter “12”, then press the key.
The password “12” will no be displayed on-screen.
[5] Delete all data.
Press the key to delete all the data.