NSD VARILIMIT VS-12PB - Setting the Initial Current Position; Procedure for Setting Initial Current Position

● 9-11 ●
9-3-2-6.Current position value setting (Initial No.95)
Designates the point within the actual detection range where the machine is currently positioned.
Note
Detection range: -1000(-10.00) to 126999(1269.99)
[1] Setting the current position value. (Ex.: 0 (0.00))
Press the ten-key.
[2] Register (write) the setting.
Press the key to register the designated setting.
[3] The displayed current position changes.
This complete the description of the required initial settings.