NSD Varlimit VS-212DN User Manual

8-17
8.6.4 Writing program to program Nos. 1- 8
This section provides an example of the program to write the desired setting data to the program No. 0
area and, then transmit that data to the VS-212DN’s program No. 1.
Conditions
The following signal assignments are used to control the VS-212DN:
o VS-212DN’s PLC Ready (I: 2/0)
o Program No. ‘write’ command (I: 2/1)

NSD Varlimit VS-212DN Specifications

General

Brand	NSD
Model	Varlimit VS-212DN
Category	Controller
Language	English