NSD Varlimit VS-212DN User Manual

6-15
6.6.2 Parameter Settings
The parameter setting data must be changed in advance, using the DeviceNet Manager. (If the data is
to be changed by the sequence data, a separate data change sequence is required.)
o VS-212DN PLC Ready: I:2/0
o Parameter settings writing command: I:2/1
o Sequence mode answer-back storage register: B3:1
o VS-212DN beginning address: O:1.1, I:1.1

NSD Varlimit VS-212DN Specifications

General

Brand	NSD
Model	Varlimit VS-212DN
Category	Controller
Language	English