NSD Varlimit VS-212DN - Program for Error Code Readout and Reset

6-18
6.6.4 Program for error code readout and reset
A program example for the error code readout and error reset operation which is used when a
VS-212DN ‘error detection’ occurs is given below.
o Error code output: O: 4/0 to 15
o Error monitor output: O:5/0
o Sensor monitor output: O: 5/1
o VS-212DN ‘online’ command: I: 2/0
o Error reset (cancel) signal: I: 2/1
o VS-212DN beginning address: O:1.1, I:1.1