Solver NEXT SPM. Instruction Manual
148
Fig. 7-134.
DFL(Heigth) curve in a point
Using a too “soft” cantilever at high humidity may cause “sticking”. If this is the case the
DFL(Heigth) curve will look as shown in Fig. 7-135.
Fig. 7-135. Spectroscopy curve when the cantilever is “stuck”
Curves of Fig. 7-134, Fig. 7-135 display relations acquired with the argument varying in
the range from the From value to the To value in forward (red curve) and in backward
(blue curve) directions.
NOTE. When the argument is
Height
, the curves are called approach (red) and retract
(blue) curves.
To Next Page
Loading...