Solver NEXT SPM. Instruction Manual
14
● the table intended for installation of the instrument measuring unit must be stable and,
whenever possible, massive;
● to provide solid stability against vibrations, SPM modules should be placed on self-
leveling floor with marble covering alongside bearing components of the building
(pillows, beams etc.);
● the measuring unit of the instrument (the approach unit with the measuring head)
should be placed on a separate table away from computers and monitors, to eliminate
electromagnetic interference;
● the instrument should be protected from the direct impact of sun radiation;
● the operation of the device is susceptible to heat flows, draughts and sudden
alternations in temperature and humidity.
To Next Page
Loading...