Oce VarioPrint 6180 - Select a Different Media for a Job

Select a different media for a job
Introduction
If you want to print a job on other media than originally defined for that job, you can select a
different media via the control panel. Requirements regarding the new media:
• The media must be available in the media catalog.
• The media must have the same size as the original media.
NOTE
You cannot change this setting for the active print job
.
Procedure
1.
Touch [Jobs] -> [Queues] -> [Scheduled jobs] or [Waiting jobs].
2.
Touch the job you want to change.
3.
Touch [Properties] - or touch the job 2x to open the [Properties] window.
4.
In the preview pane at the right-hand side, touch the media you want to change.
When more than 1 media was defined for a job, the preview pane displays a separate button for
each media.
5.
From the list, select the new media.
6.
Touch [OK].
Select a different media for a job
Chapter 9 - Carry out print jobs
145
Océ VarioPrint 6000 line