Add an automated workflow
Introduction
The Settings Editor contains 1 factory default automated workflow. However, it can be beneficial
for your productivity to add more automated workflows.
NOTE
It is not compulsory to define all the settings. When you put a check mark in front of a setting,
that setting and its values become enabled.
Procedure
1.
Go to [Workflow] -> [Automated workflows].
2.
Click the [Add] button.
A pop-up window displays the attributes you can specify for the new workflow.
3.
Put a check mark in front of the attributes you want to define.
4.
Specify or select the values of the attributes.
5.
Click [OK].
Add an automated workflow
60
Chapter 5 - Prepare the print system
Océ VarioPrint 6000 line
To Next Page
Loading...
