Oce VarioPrint 6180 - Change the Advanced Media Settings - Enable the Enhanced Media Mode

Change the advanced media settings - Enable the enhanced media mode
IMPORTANT
This setting is only available on machines that are equipped with an optional finisher.
Procedure
1.
Touch the [Enhanced media mode] button.
The text on the button changes from [Off] to [On].
NOTE
Each time you touch the button, the setting changes from [Off] to [On] and the other
way round.
2.
Press [OK].
Change the advanced media settings - Enable the enhanced media mode
Chapter 11 - Media handling
219
Océ VarioPrint 6000 line