Print a scheduled job later
Introduction
The machine prints the jobs that are present in the list of [Scheduled jobs] jobs.
However, you can decide to print a job later, for example because:
• The required media are out of stock, or
• You first want to make a proof.
Then you must move the job back to the list of [Waiting jobs].
NOTE
To select the active print job
you must first press the Stop button 2x to stop the job.
Procedure
1.
Touch [Jobs] -> [Queues].
2.
If collapsed, first touch
to expand the list of [Scheduled jobs].
3.
Touch the job or jobs you want to print later or use the [Select] button to make a selection.
To undo the multiple selection and only select 1 job, you must touch that job for 2 seconds.
4.
Press [Move].
The job is moved to the list of [Waiting jobs].
Print a scheduled job later
Chapter 8 - Plan the jobs
97
Océ VarioPrint 6000 line
To Next Page
Loading...
