Component Description
3 [Finisher] (op-
tional)
The optional finisher contains the following output trays.
• 3 output trays
• 1 upper output (see no. 4 below)
The finisher contains 2 staple cartridges to staple the jobs. The 3 output
trays can receive A4, Letter and similar media sizes. Stapled jobs (A4,
Letter and similar media sizes only) go into the output trays. The total
capacity of the output trays is 3,700 sheets (80 g/m² or 20 lb bond).
NOTE
The output trays cannot receive tab sheets.
4 [Finisher upper
output]
The finisher upper output is part of the finisher. The upper output can
receive all formats. However, the upper output is mainly intended for
large media or jobs with mixed size media. The maximum capacity of
the upper output is 500 sheets (80 g/m² or 20 lb bond).
NOTE
The upper output does not contain staple cartridges. There-
fore, the upper output cannot be the output location for jobs
that require staples.
The output locations
22
Chapter 2 - Explore the print system
Océ VarioPrint 6000 line
To Next Page
Loading...
