Toner pollution problem Solution
Toner pollution on the first sheets
along the edge of the sheet (2-3 mm)
after the automatic black image
cleaning procedure.
• Change the [Paper quality] setting from [Normal] to
[Low] (see
Change the advanced media settings -
Change the Paper quality
on page 220).
• Use the [Paper quality test] to determine if this new
setting is the right cleaning mode for this media.
•
The sheets of the 5
th
set must be totally toner free, al-
so at the edges of the media size width.
• When these sheets still show toner pollution, you can
set the [Paper quality] setting to [Lower] (see
Change
the advanced media settings - Change the Paper qual-
ity
on page 220).
• Use the [Paper quality test] to verify that this new set-
ting is the right cleaning mode for this media.
NOTE
When the peripheral pollution mainly occurs at
1 side of the sheet, it is advised to rotate the
media in the paper tray by 180 degrees.
A combination of the above pollu-
tions.
• Change the [Paper quality] setting from [Normal] to
[Low] (see
Change the advanced media settings -
Change the Paper quality
on page 220).
• Use the [Paper quality test] to determine if this new
setting is the right cleaning mode for this media.
•
The sheets of the 5
th
set must be totally toner free, al-
so at the edges of the media size width.
• When these sheets still show toner pollution, you can
set the [Paper quality] setting to [Lower] (see
Change
the advanced media settings - Change the Paper qual-
ity
on page 220).
• Use the [Paper quality test] to verify that this new set-
ting is the right cleaning mode for this media.
Ghost images in mid and high toner
coverage areas.
• Change the [Paper quality] setting from [Normal] to
[Low] (see
Change the advanced media settings -
Change the Paper quality
on page 220).
• If the print quality is still not optimal with respect to
mentioned ghost images, you can set the [Paper qual-
ity] setting to [Lower] (see
Change the advanced me-
dia settings - Change the Paper quality
on page 220).
Troubleshooting
280
Chapter 14 - Troubleshooting
Océ VarioPrint 6000 line
To Next Page
Loading...
