Power mode Control panel Description
Sleep mode Off Once the printer has been idle for the time defined in the
[Sleep mode timer] setting in the Settings Editor, the
printer goes into sleep mode automatically. Compared
to the low power mode, the printer uses less energy.
Possible values: 16 - 240 minutes.
Factory default: 30 minutes.
The printer wakes up when:
• You press the Sleep button
on the control panel, or
• A wake-up timer expires, provided that the wake-up
timer is enabled in the Settings Editor, or
• A job arrives in the list of [Scheduled jobs], provided
that the [Automatic wake-up enabled] setting in the
Settings Editor is set to [Yes].
Press the Sleep button on the right-hand side of the
control panel to put the printer into the sleep mode man-
ually. The printer goes into the sleep mode after all jobs
are finished.
The power buttons and power modes
Chapter 4 - Start the print system
45
Océ VarioPrint 6000 line
To Next Page
Loading...
