Omron MX2 Series User Manual

3 - 1
Multi-function Compact Inverter 3G3MX2-EV2 User’s Manual (I666-E1)
Operation and Test Run
This section describes the part names and key operation of the Digital Operator, and
the operation method of this product as well as the test run procedure.
3-1 Operation of Digital Operator............................................................................ 3-5
3-1-1 Part Names and Descriptions .............................................................................. 3-5
3-1-2 Key Operation Method ........................................................................................ 3-7
3-1-3 Key Operation Method with Remote Digital Operator Connected ...................... 3-13
3-2 Connections and Functions of CX-Drive ....................................................... 3-16
3-2-1 CX-Drive Connection Method ............................................................................ 3-16
3-2-2 Overview of CX-Drive Functions ....................................................................... 3-20
3-2-3 Precautions for Using CX-Drive ........................................................................ 3-24
3-3 Flow of Test Run .............................................................................................. 3-25
3-4 Operation Items for Test Run .......................................................................... 3-26
3

Omron MX2 Series Specifications

General

Cooling Method	Fan cooling
Output Frequency Range	0.1 to 400 Hz
Control Method	V/f control, Sensorless vector control
Protection Functions	Overcurrent, overvoltage, undervoltage, overload, overheating, short circuit
Communication Options	Modbus RTU
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Ambient Operating Temperature	-10°C to +50°C
Enclosure	IP20
Storage Temperature	-20°C to +65°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m
Power Supply Voltage	200-240V AC
Input Voltage	3-phase 200-240V AC