Omron MX2 Series User Manual

7 Other Functions
7 - 106
Multi-function Compact Inverter 3G3MX2-EV2 User’s Manual (I666-E1)
7-11 Option/Applied Functions (Group P)
7-11-1 Operation Selection on Option Error
7-11 Option/Applied Functions (Group P)
This section describes the functions associated with the option unit connected to the connector for
option unit, as well as the applied functions of the Inverter.
7-11-1 Operation Selection on Option Error
Select whether to have the Inverter trip or continue operation with the error from the option unit ignored,
if an error occurs due to the option unit connected to the connector for option unit.
Parameter
No.
Function name
Data
Default
data
Unit
P001
Operation Selection on Option Error
00: Trip
01: Continue operation
00
−
7-11-2 DriveProgramming Function Parameters
• Set these parameters to use the DriveProgramming parameters.
• In the DriveProgramming Function Selection (A017), enable/disable the DriveProgramming function
with the start/stop method.
• Use the DriveProgramming User Parameters to change the values of the user variables (U00 to U31)
used in the DriveProgramming program.
• For details, refer to “DriveProgramming User’s Manual (I580)”.
Parameter
No.
Function name
Data
Default
data
Unit
A017
DriveProgramming Function Selection
00: Disabled
01: Enabled (Start/stop via
multi-function input
PRG terminal)
02: Enabled (Start/stop via
power on/off)
00
−
P100 to
P131
DriveProgramming User Parameter U00
to U31
0. to 65535.
0.
−
7

Omron MX2 Series Specifications

General

Cooling Method	Fan cooling
Output Frequency Range	0.1 to 400 Hz
Control Method	V/f control, Sensorless vector control
Protection Functions	Overcurrent, overvoltage, undervoltage, overload, overheating, short circuit
Communication Options	Modbus RTU
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Ambient Operating Temperature	-10°C to +50°C
Enclosure	IP20
Storage Temperature	-20°C to +65°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m
Power Supply Voltage	200-240V AC
Input Voltage	3-phase 200-240V AC