Omron MX2 Series User Manual

Regulations and Standards
17
Multi-function Compact Inverter 3G3MX2-EV2 User’s Manual (I666-E1)
Regulations and Standards
To export (or provide to nonresident aliens) any part of this product that falls under the category of
goods (or technologies) for which an export certificate or license is mandatory according to the Foreign
Exchange and Foreign Trade Control Law of Japan, an export certificate or license (or service transac-
tion approval) according to this law is required.
Regulation
Applicable Standards
CE
UKCA
EMC
EN 61800-3
Functional safety
EN 61800-5-2, STO SIL3
EN ISO 13849-1, Cat.3/PLe
Electrical safety
EN 61800-5-1
Others
Ecodesign, RoHS
UL
US
UL61800-5-1
CA
CSA C22.2 No.274
FS
IEC 61800-5-2, STO SIL3
IEC 61508-1 to -7 SIL3
EN ISO 13849-1, Cat.3/PLe
KC
Certificate to be obtained
RCM
EN 61800-3
The customer must check the conditions that must be met for compliance with the environmental stan-
dards and regulations of their respective country.
• Checking use of regulated chemical substances
This product complies with regulated substances used in electrical parts based on the RoHS Direc-
tive. For details on the Certificate of Conformance and other regulations, contact the place of pur-
chase.
• Motor efficiency regulations
This product is subject to energy efficiency regulations when it is used in motor systems that are
driven by an inverter. For details on inverter efficiency with respect to motor output in accordance with
EU efficiency regulations, refer to the following website.
https://industrial.omron.eu/en/company-info/environmental/ecodesign-directive

Omron MX2 Series Specifications

General

Cooling Method	Fan cooling
Output Frequency Range	0.1 to 400 Hz
Control Method	V/f control, Sensorless vector control
Protection Functions	Overcurrent, overvoltage, undervoltage, overload, overheating, short circuit
Communication Options	Modbus RTU
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Ambient Operating Temperature	-10°C to +50°C
Enclosure	IP20
Storage Temperature	-20°C to +65°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m
Power Supply Voltage	200-240V AC
Input Voltage	3-phase 200-240V AC