2 On the [Autodetect] tab, set the [Drive Type Selection], [Series Type Selection] and [Con-
nection Type Selection].
Under [Drive Type Selection], select the [Inverter] box and click the [Inverter].
Then, under [Series Type Selection], select the [3G3MX2] box.
Next, under [Connection Type Selection], select the [Direct] box and click the [Direct].
Then, click the [Advanced Options: Direct] button to the right.
Additional Information
For the reduction of the automatic search time, deselect unnecessary check boxes to narrow
down the scope of autodetection.
3 In the [Advanced Options [Direct]] window, set communications options.
To Next Page
Loading...
