Omron MX2 Series User Manual

5 Basic Settings
5 - 7
Multi-function Compact Inverter 3G3MX2-EV2 User’s Manual (I666-E1)
• The 3G3MX2-EV2 Series Inverter provides two controls that can be switched as required.
• Even with a single motor, you can use the 2nd control to configure the control and settings suitable
for your application.
• The 2nd control is allocated in the 200s parameter number (e.g. A201 relative to A001).
For the explanation of the 2nd control, refer to 7-4-3 2nd Control Function (SET) on page 7-33.
Clearing Fault Monitor Data
5
5-1 Parameter Display and Parameter Initialization
5-1-2 Parameter Initialization
Step 2: Set b180 to 01 and
press the Enter
key.
Enter
Step 1: Set b084 to 04 and
press the Enter
key.
Enter
Clearing
completed
Switching between 1st and 2nd Controls

Omron MX2 Series Specifications

General

Cooling Method	Fan cooling
Output Frequency Range	0.1 to 400 Hz
Control Method	V/f control, Sensorless vector control
Protection Functions	Overcurrent, overvoltage, undervoltage, overload, overheating, short circuit
Communication Options	Modbus RTU
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Ambient Operating Temperature	-10°C to +50°C
Enclosure	IP20
Storage Temperature	-20°C to +65°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m
Power Supply Voltage	200-240V AC
Input Voltage	3-phase 200-240V AC