opto engineering ITALA - Warranty and Certifications; Warranty; CE Declaration; FCC Declaration

Itala | INSTRUCTION MANUAL
2 WARRANTY AND CERTIFICATIONS
2.1 Warranty
The device warranty is 5 years from the effective delivery date with reference to the device serial
number.
Warranty covers the replacement or the repair of the defective part (components, device or part
of it) with the exclusion of dismantling and shipping costs.
The replacement of one or more components does not renew the warranty period of the entire
device.
The electronics and parts subjected to normal use or deterioration due to atmospheric agents and
external environment are excluded from the warranty. Also, all failure caused by the lack of, in-
sufficient or incorrect maintenance performed by unskilled or unauthorized personnel or due to
unintended use or unauthorized replacements, alterations or repairs is excluded from the war-
ranty.
The general validity of the warranty depends on:
• Maintenance being performed correctly as described in the device manual;
• The intended use of the device as specified in this manual.
2.2 CE Declaration
Itala cameras are conformal to the EMC directive 2014/30/EU and therefore comply with the fol-
lowing standards:
Standard
Date of issue Description
EN 61000-6-2 2019 Generic standards - Immunity standard for industrial
environments
EN 61000-6-4 2020 Generic standards - Emission standard for industrial
environments
2.3 FCC Declaration
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined by turning the equipment off
v1.12 - eng 10