opto engineering ITALA - Camera Features; Device Control

Itala | INSTRUCTION MANUAL
6 CAMERA FEATURES
This chapter provides a summary of the standard and custom features of the Itala camera se-
ries. Features are defined following the Standard Feature Naming Convention (SFNC) and GenICam
nomenclature. The following sections provide more detailed explanation of each feature.
6.1 Device Control
This section contains the features related to the control and information of the device.
This is mainly used to identify the device during the enumeration process and to obtain informa-
tion about the device itself.
In Table 14 are listed all the Device Control parameters.
Feature Description Interface Access
DeviceType Returns the device type IEnumeration R
DeviceScanType Scan type of the sensor of the
device
IEnumeration R
DeviceVendorName Name of the manufacturer of
the device
IString R
DeviceModelName Model of the device IString R
DeviceManufacturerInfo Manufacturer information about
the device
IString R
DeviceVersion Version of the device IString R
DeviceFirmwareVersion Version of the firmware in the
device
IString R
DeviceSerialNumber Device serial number IString R
DeviceUserID User-programmable device
identifier
IString RW
DeviceTLType Transport Layer type of the
device
IEnumeration R
DeviceTLVersionMajor Major version of the Transport
Layer of the device
IInteger R
DeviceTLVersionMinor Minor version of the Transport
Layer of the device
IInteger R
DeviceLinkSelector Selects which Link of the device
to control
IInteger RW
DeviceLinkSpeed Indicates the speed of
transmission negotiated on the
specified Link
IInteger R
v1.12 - eng 55