Itala | INSTRUCTION MANUAL
• This device must not be used in an application where its failure could cause a hazard to human
health or damage to other equipment. Keep in mind that if the device is used in a manner not
foreseen by the manufacturer, the protection provided by its circuits and by its enclosure may
be impaired;
• This is a low voltage power supplied device. As such, the potential difference between any com-
bination of applied signals must not exceed the supply voltage at any time;
• Higher voltages may cause a fault and can be dangerous to human health;
• This device has limited protection against transients caused by inductive loads. If necessary, use
external protection devices like fast diodes or better still, specific transient protectors;
• Do not allow foreign objects to enter the unit or drop into holes, terminals and other openings
or gaps. This may cause fire or electric shock, possibly resulting in serious injury;
• Disconnect the power cable before moving the product. Failure to comply with this precaution
may damage the power cable, cause fire or electric shock, possibly resulting in serious injury;
• Do not scratch, cut, open or twist the power cables. It may cause malfunctioning, fire or electric
shock, possibly resulting in serious injury;
• If the power cable is damaged or cracked, please contact our technical support and do not use
the product. Damaged cables may cause malfunctioning, fire or electric shock, possibly resulting
in serious injury;
• Do not insert or remove the plug of the power cable with wet hands. It may cause electric shock,
possibly resulting in serious injury;
• Do not use the product in presence of inflammable gas. It may cause outbreaks and flames,
possibly resulting in serious injury;
• If you notice any abnormality such as smell, smoke or overheating, turn off the power and dis-
connect the power cables. Continuing to use the product in these conditions may cause fire or
electric shock, possibly resulting in serious injury;
• If you have dropped the product or damaged the product case, turn off the power and disconnect
the power cables. Continuing to use the product in these conditions may cause fire or electric
shock, possibly resulting in serious injury.
1.4 Revisions
In Table 1 are listed all the user manual revisions.
In the column Description are listed all the relevant differences between different revisions.
Rev. Date Description FW ver.
1.0 22/09/2021 First manual release 1.0.0 - 1.1.2
v1.12 - eng 6
To Next Page
Loading...