Itala | INSTRUCTION MANUAL
1.11 16/01/2024 - Correction of the monochrome test pattern sequence
- Update of the sensors optical responses plots
- Revision of all the feature names cited in the document
- Added Sequencer Control section
- Added Sequencer configuration use case
2.1.0 - 2.1.2
1.12 30/05/2024 - Added Dual Use classification info for IMX990 cameras
- Added ChunkSequencerSetActive features
- Added a note for Sequencer paths priority
- Improved sequencer multi-path example
- Added IMX249 support (ordering code, dual exposure,
QE plots)
- Correction of Dual Exposure timings
- Correction of random vibration test PSD
- Added sensor centering data
- Updated Dual Exposure timings
- Updated ordering code information
- Added Section 6.3.1
- Added Section 6.10.4
≥ 2.2.0
Table 1: Manual revisions
1.5 Ordering code
The camera part number is composed as follow:
ITA000-WX-00Y-ZZ
The ordering code is explained in Table 2.
Refer to Opto Engineering website to check the availability of the desired part number.
NOTE: ITA13-GM-10C-SWIR product is subject to statutory export control regulations and may
require written information on intended end use and final destination.
Dual Use classification: 6A003.B.4.A.
v1.12 - eng 8
To Next Page
Loading...