opto engineering ITALA - Storage and Use Conditions; Storage Conditions; Operating Conditions

Itala | INSTRUCTION MANUAL
ITA000-AB-00C-DD
88-5F-E8-20-00-00
123456
SN:
MAC:
MADE IN
ITALY
Figure 1: Example of camera label.
3.3 Storage and use conditions
3.3.1 Storage conditions
Storage environment between -10°C and 60°C.
Avoid thermal shock by not exposing the product to sudden changes in temperature.
Store the product in a dry place: storage environment with relative humidity (RH) less than 80%
(no condensation).
3.3.2 Operating conditions
Extreme temperatures affect the product functionality, especially the electronic components.
Avoid thermal shock by not exposing the product to sudden changes in temperature.
Since the product includes electronic components, it may generate heat when functioning: it’s very
important to dissipate an appropriate amount of heat (if necessary, operate the device with a
forced air cooling system).
Use the product in a dry place: operating environment with relative humidity (RH) less than 80%
(no condensation).
In general, avoid to store and use the camera in the following environments:
• Environments with strong electric/magnetic fields.
• Places exposed to direct sunlight, rain or snow.
• Environments exposed to particular gas and dangerous substances.
• In extremely vibrating systems.
• Dusty places.
• Extremely humid places.
• Excessive hot/cold environments.
v1.12 - eng 14