Itala | INSTRUCTION MANUAL
time
grey
levels
127
255
50
time
grey
levels
127
255
50
Figure 57: In case of low damping factor (figure on the left) the algorithm has a fast re-
sponse but oscillations may rise; in case of high damping factor(figure on the right) the
algorithm is stable but it can require long time to converge.
by an excessively long exposure time.
Figure 58: When an oeExposureAutoMax is set, the tar-
get brightness may not be achieved, but long exposures
are avoided, thus preventing the reduction of the camera
frame rate.
6.6 LUT Control
Features in this chapter describe the Look-up table (LUT) related features.
Feature Description Interface Access
LUTSelector Selects which LUT to control IEnumeration RW
LUTEnable Activates the selected LUT IBoolean RW
v1.12 - eng 77
To Next Page
Loading...