Itala | INSTRUCTION MANUAL
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
2.4 KC Certification
Electrical and electronic equipment imported into South Korea is subject to KC certification. This
is a mandatory certification system that ensures that only products certified by recognized bodies
can enter the South Korean market. In particular, the certification checks the requirements for
electromagnetic compatibility (EMC).
Itala cameras available for the South Korean market are identified by the KC mark and the KC
registration number. For more information about the KC identification data, please scan the QR
code on the product or its packaging.
2.5 Shock and vibrations
Itala cameras have been tested for shocks and vibrations according to the following standards and
limits:
Standard
Date of issue Test Parameters
EN 60068-2-27 2009 Shock x/y/z axis, 20g, 11ms, 10 pos. / 10 neg.
shocks
EN 60068-2-6 2008 Sine
vibration
x/y/z axis, 10g, 50-500 Hz, 10 sweep
EN 60068-2-64 2008+A1:2019 Random
vibration
x/y/z axis, 5g RMS, 0.056g
2
/Hz PSD, 30 min
for each axis
2.6 RoHS, REACH and WEEE
Itala cameras are conformal to the following directives and standards:
• RoHS 2011/65/EU
v1.12 - eng 11
To Next Page
Loading...