EasyManua.ls Logo

opto engineering ITALA - Sensor Optical Response

opto engineering ITALA
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Itala | INSTRUCTION MANUAL
12
330 1.8 8.4 25.6
560 4.7 10.2 18.2
1000 12.0 11.4 11.4
2200 31.3 12.0 5.4
24
560 1.5 17.0 30.3
1000 4.0 21.2 21.2
2200 15.8 23.3 10.6
4700 36.9 23.8 5.1
Table 9: Maximum output delays and electrical measurements for Itala cameras output signals
5.3 Sensor optical response
Typically all the 1st generation Sony IMX sensors exhibit the same optical response.
The relative transmittance for monochrome and color sensors is shown in Fig.25 and Fig.26.
Please refer to Section 1.5 to retrieve the information about the image sensor family.
Typically all the 2nd generation Sony IMX sensors exhibit the same optical response.
The relative transmittance for monochrome and color sensors is shown in Fig.27 and Fig.28.
Please refer to Section 1.5 to retrieve the information about the image sensor family.
Typically all the 4th generation Sony IMX sensors exhibit, on average, the same optical response.
The relative transmittance for monochrome and color sensors is shown in Fig.29 and Fig.30.
Please refer to Section 1.5 to retrieve the information about the image sensor family.
The relative transmittance for Sony IMX990 SenSWIR sensor is shown in Fig.31.
Please refer to Section 1.5 to retrieve the information about the image sensor family.
v1.12 - eng 43

Table of Contents