Itala | INSTRUCTION MANUAL
400 450 500 550 600 650 700 750 800 850 900 950 1,000 1,050 1,100
0
20
40
60
80
100
Wavelength [nm]
Transmittance [%]
IR cut filter transmittance
5.5 Mechanical specifications
5.5.1 Dimensional drawings
Here are shown the dimensional drawings for all the camera models.
The TYPE 1 drawings refers to all the cameras up to the 12Mp image sensor. These are equipped
with a standard C mount (1 inch diameter, 32 threads per inch), with a flange distance of 17.526
mm.
The TYPE 2 drawings refers to all the cameras from 16Mp to 31Mp image sensor. These are equipped
with an M42x1 threaded mount, with a flange distance of 12 mm.
TYPE 1 dimensional drawings
v1.12 - eng 48
To Next Page
Loading...