opto engineering ITALA - User Set Control

Itala | INSTRUCTION MANUAL
EventFrameTriggerMissed-
FrameID
Returns the unique Identifier of
the Frame (or image) that
generated the Frame Trigger
Missed Event
IInteger R
Table 29: Event Frame Trigger Missed Data features
Feature Description Interface Access
EventLine0RisingEdge Returns the unique Identifier of
the Line 0 Rising Edge type of
Event
IInteger R
EventLine0RisingEdgeTimestamp Returns the Timestamp of the
Line 0 Rising Edge Event
IInteger R
EventLine0RisingEdgeFrameID Returns the unique Identifier of
the Frame (or image) that
generated the Line 0 Rising Edge
Event
IInteger R
Table 30: Event Line 0 Rising Edge Data features
Feature Description Interface Access
EventLine1RisingEdge Returns the unique Identifier of
the Line 1 Rising Edge type of
Event
IInteger R
EventLine1RisingEdgeTimestamp Returns the Timestamp of the
Line 1 Rising Edge Event
IInteger R
EventLine1RisingEdgeFrameID Returns the unique Identifier of
the Frame (or image) that
generated the Line 1 Rising Edge
Event
IInteger R
Table 31: Event Line 1 Rising Edge Data features
6.14 User Set Control
This section describes the features for global control of the device settings. It allows loading or
saving factory or user-defined settings.
Loading the factory default User Set guarantees a state where a continuous acquisition can be
started using only the mandatory features.
v1.12 - eng 98