opto engineering ITALA - Page 41

Itala | INSTRUCTION MANUAL
PoE (Power over Ethernet) ! ! -
Gigabit ethernet ! ! -
Packet resend option ! ! -
Static IP/DHCP ! ! -
IEEE 1588 (PTP) ! ! -
Opto-isolated inputs 2 2 p.52
Opto-isolated outputs 4 1 p.52
Temperature sensor Image sensor, FPGA Image sensor, FPGA -
User sets Factory + 2 user sets Factory + 2 user sets -
Remote FW update ! ! p.30
Burst acquisition ! ! -
Trigger hardware ! ! -
Trigger software ! ! -
Timers 2 2 p.88
Counters 4 4 p.88
Encoder control 1
4
1
4
p.89
Logic blocks 4 4 p.92
Logic functions OR, AND, LUT OR, AND, LUT p.93
Serial communication RS232/485 p.100
Liquid Lens controller ! p.103
CERTIFICATIONS AND COMPLIANCES
GigEVision compliance ! ! -
GenICam compliance ! ! -
CE certificate ! ! p.10
Shock and Vibrations ! ! p.11
RoHS ! ! p.11
REACH ! ! p.11
WEEE ! ! p.11
ENVIRONMENTAL
Storage temperature -10°C - 60°C -10°C - 60°C p.14
Storage Humidity RH < 80% RH < 80% p.14
Operating temperature
5
-25°C - 65°C -25°C - 65°C p.14
Operating Humidity RH < 80% RH < 80% p.14
1
Sensor specific data.
2
With BayerRG pixel format, also BayerGR, BayerGB, BayerBG are included in the available pixel formats.
3
Not available for monochrome sensors.
4
Refer to paragraph 6.10 for the compatible encoder interfaces.
5
Case temperature, measured on the front part of the camera body.
v1.12 - eng 40