Oracle SPARC S7-2 Service Manual

Verify the Motherboard
9.
Reconnect the disk backplane power cable to the motherboard (6).
10.
Reinstall the air baffle.
11.
Reinstall the following reusable components.
a.
PCIe risers and attached PCIe cards.
See “Servicing PCIe Cards” on page 87.
b.
Power supplies.
See “Install a Power Supply” on page 72.
c.
Fan modules.
See “Install a Fan Module” on page 65.
12.
Return the server to operation.
See “Returning the Server to Operation” on page 145.
13.
Update the system firmware.
See the Performing Firmware Updates section in the Oracle® ILOM Administrator's Guide for
Configuration and Maintenance.
14.
When you replace a motherboard that contains an SP, download the fallback
miniroot image for your hardware and your Oracle Solaris version from My
Oracle Support at https://support.oracle.com.
Then follow the procedure "Uploading a New Solaris Miniroot Package From SP to Host" in
the Oracle ILOM Administrator's Guide for Configuration and Maintenance.
Related Information
■
“Remove the Motherboard” on page 136
Verify the Motherboard
1.
At the Oracle ILOM prompt, start the fault management shell.
-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y

142 SPARC S7-2 Server Service Manual • March 2017

Oracle SPARC S7-2 Specifications

General

Brand	Oracle
Model	SPARC S7-2
Category	Server
Language	English