Oracle SPARC S7-2 - Locate the Server; Removing Power from the Server

Locate the Server
Related Information
■
“Front Panel Components” on page 11
Locate the Server
You can use the Locator LEDs to identify one particular server from many other servers.
1.
At the Oracle ILOM prompt, type:
-> set /System locator_indicator=on
The white System Locator LEDs (one on the front panel and one on the rear panel) blink.
2.
After locating the server with the blinking Server Locator LED, turn it off by
pressing the Locator button with a stylus.
Alternatively, you can type an Oracle ILOM command to turn off the Server Locator LED.
-> set /System locator_indicator=off
Related Information
■
“Front Panel Components” on page 11
Removing Power From the Server
Step Description Links
1. Prepare the server for powering off. “Prepare to Power Off the Server” on page 38
2. Power off the server by one of three methods. “Power Off the Server” on page 38
3. Disconnect the cables from the server. “Disconnect Cables From the Server” on page 40
Related Information
■
“Front Panel Components” on page 11
■
Servers Administration
Preparing for Service 37