Find the Server Serial Number
Caution - When you remove a component while the server is connected to power, insert a
new component or filler within 60 seconds to ensure proper system chassis cooling. After
you complete cold-servicing, ensure that all fillers are in place before connecting the server to
power.
Related Information
■
“Servicing Drives” on page 51
■
“Servicing PCIe Cards” on page 87
■
“Servicing Fan Modules” on page 61
Find the Server Serial Number
You need the serial number of the server's chassis to obtain technical support for the server.
Note - When a motherboard or drive backplane is replaced, the chassis serial number and part
number might need to be programmed into the new component. This action must be done in a
special service mode by trained service personnel.
Locate the serial number using one of these methods:
■ Read the serial number from a sticker located on the front of the server or
another sticker on the side of the server.
■ At the Oracle ILOM prompt, type:
-> show /System
/System
Targets:
. . .
In the output look for a line under Properties that identifies the product serial number. For
example:
serial_number = BKL1026F8F
36 SPARC S7-2 Server Service Manual • March 2017
To Next Page
Loading...
Need help?
General