Oracle SPARC S7-2 - Remove a Pcie Riser from Pcie Slot 1 or 2

Remove a PCIe Riser From PCIe Slot 1 or 2
Related Information
■
“PCIe Slot Characteristics” on page 97
Remove a PCIe Riser From PCIe Slot 1 or 2
This is a cold-service procedure that can be performed by a customer. Power down the server
completely before performing this procedure.
1.
Prepare for servicing.
See “Preparing for Service” on page 33.
2.
Select the PCIe riser that you want to remove.
See “PCIe Slot Characteristics” on page 97.
3.
If a PCIe card is installed in the riser, disconnect any external cables from the
card.
Servicing PCIe Cards 89