Servicing Fan Modules
You need to extend the server from the rack and open the server fan door to access the fan
modules.
Note - In single-processor servers, only three fans are supported. In this case, slot FM 3
contains a fan filler.
■
“Fan Module LEDs” on page 62
■
“Remove a Fan Module” on page 63
■
“Install a Fan Module” on page 65
■
“Verify a Fan Module” on page 66
Related Information
■
“Preparing for Service” on page 33
Servicing Fan Modules 61
To Next Page
Loading...
Need help?
General