Service Tools
Antistatic Mat
Place ESD-sensitive components such as motherboards, memory, and other PCBs on an
antistatic mat.
Related Information
■
“Prevent ESD Damage” on page 41
■
“Service Tools” on page 35
Service Tools
You need the following tools for most service operations:
■
Antistatic wrist strap
■
Antistatic mat
■
No. 2 Phillips screwdriver
■
T10 Torx screwdriver
■
Pen or pencil (to power on server)
Related Information
■
“Safety Information” on page 33
Fillers
A filler is an empty metal or plastic enclosure that is installed at the factory or in the field into a
server component slot that does not contain a functioning component. The fillers ensure proper
airflow through the system. Depending on the component configuration, the server can include
the following types of fillers:
■
Drive filler
■
PCIe card filler (covering back panel, not filling the connector slot)
■
Fan filler
Preparing for Service 35
To Next Page
Loading...
Need help?
General