Performing Initial Configuration (CLI)
a.
Go to maintenance system setup net, and then enter interfaces.
hostname:maintenance system setup net> interfaces
b.
Enter show to view the interface. Enter cd .. to return to the context for the
next step.
hostname:maintenance system setup net interfaces> show
Interfaces:
INTERFACE STATE CLASS LINKS ADDRS LABEL
igb0 up ip igb0 192.0.2.11/24 Untitled
Interface
hostname:maintenance system setup net interfaces> cd ..
c.
Configure routing for the interface labeled Untitled Interface. Enter cd .. to
return to the correct context for the next step.
For detailed information, see “Configuring Network Routing” in Oracle ZFS Storage
Appliance Administration Guide, Release OS8.8.x.
hostname:maintenance system setup net> routing
hostname:maintenance system setup net routing> create
hostname:maintenance system setup net route (uncommitted)> set destination=0.0.0.0
destination = 0.0.0.0 (uncommitted)
hostname:maintenance system setup net route (uncommitted)> set mask=0
mask = 0 (uncommitted)
hostname:maintenance system setup net route (uncommitted)> set interface=igb0
interface = igb0 (uncommitted)
hostname:maintenance system setup net route (uncommitted)> set gateway=192.0.2.1
gateway = 192.168.56.101 (uncommitted)
hostname:maintenance system setup net route (uncommitted)> set family=IPv4
family = IPv4 (uncommitted)
hostname:maintenance system setup net route (uncommitted)> commit
hostname:maintenance system setup net routing> cd ..
d.
Enter interfaces, select the interface labeled Untitled Interface, and then
enter show to view its properties.
hostname:maintenance system setup net> interfaces
hostname:maintenance system setup net interfaces> select igb0
hostname:maintenance system setup net interfaces igb0> show
Properties:
state = up
curaddrs = 192.0.2.11/24
258 Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x • August 2021
To Next Page
Need help?
General
