range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
296
modify it manually, if it is modified, the u-boot source code will be re-downloaded
when the compiling system is running
j. userpatches: Store configuration files needed to compile scripts
test@test:~/orangepi-build$ ls
build.sh external kernel LICENSE output README.md scripts toolchains
u-boot userpatches
4.3. Compile u-boot
1) Run the build.sh script, remember to add sudo permission
test@test:~/orangepi-build$ sudo ./build.sh
2) Select U-boot package，then enter
3) Then select the model of the development board
4) Then it will start to compile u-boot, and some information prompted during
compilation is explained as follows
To Next Page
Loading...