ORANGE Pi 3B - Orange Pi os Arch System User Guide Instructions

range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
313
adjusted
Gigabit Ethernet port
OK
Network port status light
OK
headphone playback
OK
headphone recording
OK
LED lights
OK
GPU
NO
NPU
NO
VPU
NO
5.2. Orange Pi OS Arch System User Guide Instructions
First of all, please note that the OPi OS Arch system does not have a default orangepi
user and password, so after burning and starting the system, it is impossible to log in
remotely through the serial port and ssh directly (not even the root user). This is different
from Ubuntu and Debian systems.
When the OPi OS Arch system starts for the first time, it needs to be connected to an
HDMI display, and then initialize the system settings through the user wizard (including
creating a new user name and setting a password). The setup steps of the User Wizard are
as follows:
a) After burning the system for the first time and enter the desktop, you will see the
user wizard program shown in the figure below