range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
202
# Do not make changes to this file unless you know what you are doing--modify
# the SWIG interface file instead.
CLASSES
builtins.object
GPIO
I2C
Serial
nes
class GPIO(builtins.object)
| GPIO(pinmode=0)
|
>>>
3.17.2. 40pin GPIO port test
wiringOP-Python is the same as wiringOP, you can also determine which GPIO
pin to operate by specifying the wPi number, because there is no command to check
the wPi number in wiringOP-Python, so you can only check the board wPi number
and physical Correspondence between pins.
To Next Page
Loading...