range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
201
4) Then enter the following command. If there is a help information output, it means that
Wiringop-Python is successfully installed. Press the q key to exit the interface of the help
information
root@orangepi:~/wiringOP-Python# python3 -c "import wiringpi; help(wiringpi)"
Help on module wiringpi:
NAME
wiringpi
DESCRIPTION
# This file was automatically generated by SWIG (http://www.swig.org).
# Version 4.0.2
#
# Do not make changes to this file unless you know what you are doing--modify
# the SWIG interface file instead.
5) Test whether the wiringOP-Python is installed successfully under the Python
command line is shown below：
a. First use the python3 command to enter the command line mode of python3
root@orangepi:~# python3
b. Then import the python module of wiringpi
>>> import wiringpi;
c. Enter the following command to view the help information of wiringOP-Python,
and press the q key to exit the interface of the help information
>>> help(wiringpi)
Help on module wiringpi:
NAME
wiringpi
DESCRIPTION
# This file was automatically generated by SWIG (http://www.swig.org).
# Version 4.0.2
#
To Next Page
Loading...