range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
289
3) Short press the switch button on the development board after shutting down to start
up.
4) The command to restart the Linux system is
orangepi@orangepi:~$ sudo reboot
4. Linux SDK——orangepi-build instructions
4.1.
Compilation system requirements
We can cross-compile the Linux image of the development board on the x64
computer, or compile the Linux image of the development board on the
Ubuntu22.04 system of the development board, please choose one according to your
preference.
If you use orangepi-build to compile the Linux image in the Ubuntu22.04 system
of the development board, please do a good job of cooling (especially when the SSD
To Next Page