range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
134
3.6.3. How to set a static IP address
Please do not set a static IP address by modifying the /etc/network/interfaces
configuration file.
3.6.3.1. Use the nmtui command to set a static IP address
1) First run the nmtui command
orangepi@orangepi:~$ nmtui
2) Then select Edit a connection and press Enter
3) Then select the network interface that needs to set a static IP address, for example, to
set the static IP address of the Ethernet interface, select Wired connection 1.
To Next Page
Loading...