range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
300
4.4.
Compile the Linux kernel
1) Run the build.sh script, remember to add sudo permission
test@test:~/orangepi-build$ sudo ./build.sh
2) Select Kernel package,then enter
3) Then select the model of the development board
4) Then it will prompt whether to display the kernel configuration interface. If you do
not need to modify the kernel configuration, select the first one. If you need to modify the
kernel configuration, select the second one.
5) If you choose to display the kernel configuration menu (the second option) in step 4,
the kernel configuration interface opened by make menuconfig will pop up. At this time,