March 2006 910-257C
MG2 Series Page 6-3
MEASUREMENT
MODE:
Standard time interval from a
precision delay after the excitation
to the first echo using a dual
element transducer.
MG2-XT and MG2-DL:
•THRU-COAT
®
- Measure-
ment of both metal and coat-
ing thickness using a single
backwall echo (with D7906-
SM and D7908 transducers)
• Thru-Paint Echo-to-Echo -
Time interval between two
successive backwall echoes
for elimination of paint and
coating
METRIC/ENGLISH
MODES:
Allows selection between English
and metric units via the keypad
BATTERY: Three (3) AA alkaline batteries
BATTERY LIFE: 150 hours minimum (Measure
Mode)
30 hours minimum (Backlight On)
OPERATING TEMP.
RANGE
(ELECTRONICS):
-10° C to +50° C
To Next Page