March 2006 910-257C
MG2 Series Page 4-13
Step 4: Press [MEAS] to return to the Measure Mode.
4.6 System Setup
The System Setup menu allows the user to turn on/off many MG2
Series gage configurations.
Features include:
•Beeper
•Inactive Time
•Radix
• Backlight Mode
• 36DL PLUS Output
4.6.1 Beeper
Beeper allows the user to turn the audio beeper of the MG2 Series
gages on and off. The Beeper is set to On by default and will generate
an audio beep when any key is pressed or when an alarm condition has
been detected.
Step 1: Press [2ndF][ ](Setup) to display the setup tabs.
Step 2: Use the [ , ] keys to highlight the System tab.
Step 3: Use the [ ] key to highlight Beeper and [ , ] to select
between Off and On.
To Next Page
Loading...
