Name Description Value Range Links
Option—
Privacy Mode
Selects whether private
dialling is enabled or disabled,
and how many digits to hide
when enabled.
To enable this setting, Print
Information—Outgoing Call
on the SMDR tab should be
set to Print.
Print Dialled
Number: Disables
private dialling; all
dialled numbers
(including additional
digits dialled after
connection) are
shown on SMDR.
No Print: No
additional digits
dialled after
connection will be
shown on SMDR.
Print "X", Print "XX",
Print "XXX", Print
"XXXX": The
selected number of
digits at the end of
dialled telephone
numbers, and any
additional digits
dialled after
connection, are
shown on SMDR as
"X".
PC Programming
Manual References
19.1 PBX Configuration—
[11-1] Maintenance—Main—
SMDR—Print Information—
Outgoing Call
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
Option—
Condition Code
"RC"
Specifies whether the time of
receiving an incoming trunk
call is printed.
No Print, Print
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
Option—
Condition Code
"AN"
Specifies whether the time of
answering an incoming trunk
call is printed.
No Print, Print
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
Option—Caller
ID Modification
Specifies whether Caller ID
numbers are recorded on
SMDR as received (before
being modified by the PBX) or
after being modified.
Before Modification,
After Modification
PC Programming
Manual References
11.1.3 PBX Configuration—
[3-1-3] Group—Trunk Group
—Caller ID Modification
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
Emergency Call
Notification
Specifies if an emergency call
is recorded on SMDR only
when the call is completed, or
when the call is initially dialled
as well.
End of Call, Start
and End of Call
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
19.1 PBX Configuration—[11-1] Maintenance—Main
PC Programming Manual 553