Panasonic KX-NS300 - Page 554

Name Description Value Range Links
LAN—SMDR
Port Number
Specifies the port number
used to output SMDR data via
the LAN.
1–65535
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
LAN—SMDR
Password
Specifies the password used
to output the SMDR data via
the LAN.
Max. 10 characters
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
LAN—New Line
Code for Telnet
Specifies the new line code for
a terminal emulator.
If the terminal emulator
automatically feeds lines with
a carriage return, select CR
(Carriage Return).
If not, select CR + LF (Line
Feed).
CR + LF, CR
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
Maintenance
Name Description
Value
Range
Links
Local Alarm
Display—
Extension 1,
Extension 2
Specifies the extension numbers of
PTs that will be notified by the PBX
about local alarms. When the PBX
detects a PBX error, the System
Alarm button on the PT turns on red.
When this button is pressed, the
display will show the error number,
and the button light will turn off
automatically.
Max. 5 digits
(consisting
of 0–9)
Feature Manual
References
5.6.4 Local Alarm
Information
Daily Test Start
Time—Set
Enables the daily self check of the
PBX for local alarm and error log.
Disable,
Enable
Feature Manual
References
5.6.4 Local Alarm
Information
Daily Test Start
Time—Hour
Specifies the hour of the PBX daily
self check start time.
0–23
Feature Manual
References
5.6.4 Local Alarm
Information
Daily Test Start
Time—Minute
Specifies the minute of the PBX daily
self check start time.
0–59
Feature Manual
References
5.6.4 Local Alarm
Information
19.1 PBX Configuration—[11-1] Maintenance—Main
554 PC Programming Manual