MIB info—SysContact
Specifies the name and contact information of the system administrator.
Value Range
Max. 255 characters
Maintenance Console Location
27.3.3 Network Service—[3-3] Client Feature—SNMP Agent
Feature Guide References
2.4.4 Simple Network Management Protocol (SNMP) System Monitor
MIB info—SysName
Specifies the administrative name for the system.
Value Range
Max. 255 characters
Maintenance Console Location
27.3.3 Network Service—[3-3] Client Feature—SNMP Agent
Feature Guide References
2.4.4 Simple Network Management Protocol (SNMP) System Monitor
MIB info—SysLocation
Specifies the physical location for the system.
Value Range
Max. 255 characters
Maintenance Console Location
27.3.3 Network Service—[3-3] Client Feature—SNMP Agent
Feature Guide References
2.4.4 Simple Network Management Protocol (SNMP) System Monitor
SNMP Manager #1 / SNMP Manager #2
It is possible to assign up to two PCs as SNMP managers. The settings related to SNMP manager activity can
be programmed for each SNMP manager, indicated as No.1 and No.2 on the screen.
This option is only available at Installer level.
PC Programming Manual 1001
27.3.3 Network Service—[3-3] Client Feature—SNMP Agent
To Next Page
Loading...
