11.1.2 PBX Configuration—[3-1-2] Group—Trunk Group—Local
Access Priority
Trunk groups can be assigned a priority for Idle Line Access. When making a trunk call by Idle Line Access,
the PBX will search trunk groups for an idle trunk according to the priority assigned here.
Trunk Group No. & Name
Specifies the trunk group assigned to the corresponding priority level.
Select the blank option to not assign a trunk group to the priority.
Value Range
Trunk Group No. 1–64
Maintenance Console Location
11.1.2 PBX Configuration—[3-1-2] Group—Trunk Group—Local Access Priority
PC Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Feature Guide References
2.5.5.3 Trunk Access
562 PC Programming Manual
11.1.2 PBX Configuration—[3-1-2] Group—Trunk Group—Local Access Priority
To Next Page
Loading...
